Oki ML6300FB - Page 54

Troubleshooting > 54
Improper continuous forms feed (cont.)
Paper distortion or
jam.
Forms are loaded
with their left
holes out of line
with the right
ones.
Load forms with their
left holes in line with
the right ones.
Inadequate
distance between
the left and right
Pin Tractors,
making for loose
paper.
Relocate the Pin
Tractors to tighten the
paper.
Skew paper
feeding.
Move the paper to
make it straight.
Paper movement
is blocked.
Remove the blockage.
Paper source is too
far from the
printer.
Move the paper source
nearer to the printer.
Paper not specified
for the printer.
Use paper types
specified for this
printer.
Several blank lines
appear in the
printout.
Skip over
perforation
spacing is
selected.
Cancel the skip over
perforation spacing.
The selected skip
over perforation
spacing does not
match the physical
tear-off
perforation
positions.
The paper length
selected in the
application does
not match the
physical paper
length.
Match the paper
length selected in the
application with the
physical paper length
in use.
Select the paper
length in number of
lines in the
application.
Problem Cause Action