Getting started > 10
2. Connect the power cable connector (1) to the power
connector (2) on the printer.
3. Connect the power cable to a 120 V AC power outlet and
switch on the outlet power.
4. Turn the printer Power Switch to ON.
5. Check that the POWER indicator on the control panel
illuminates.
Producing a test print
To check that your printer is operational, produce a test print
on a sheet of letter-size paper (for example) as follows:
1. Turn the printer Power Switch to OFF.
1
2
CAUTION!
Allow at least 5 seconds between turning the printer ON
after turning it OFF. A shorter time interval between
turning ON/OFF operations may cause printer power
failure.
Do not turn the printer OFF while it is printing as this
may result in damage to the print head.
To Next Page
Loading...
Need help?
General
