Paper handling > 26
Set the Paper Thickness lever for overall paper thickness as
follows:
Notes
Printing with lever positions 5 – 9 is not guaranteed.
If the lever position does not suit the paper thickness,
paper feeding and printing may not work properly.
Do not print bankbooks to avoid possible pin
breakage/ribbon snagging.
Printing can be carried out with the lever position set
to 4 for paper thickness up to 0.39 mm.
When lever positions 5-9 are selected, printing quality
for carbon paper may decline resulting in illegible
characters for example.
Overall paper thickness Lever position
0.06 – 0.12 mm 1
0.13 – 0.21 mm 2
0.22 – 0.30 mm 3
0.31 – 0.39 mm 4
0.40 – 0.48 mm 5
0.49 – 0.57 mm 6
0.58 – 0.66 mm 7
0.67 – 0.75 mm 8
0.76 – 0.84 mm 9
To Next Page
Loading...
