Command 135 – Read Calibration Data – Response Length: 18 Bytes
Span Reserve Value Channel 1
Next Cal Due In Days Channel 1
Span Reserve Value Channel 2
Next Cal Due In Days Channel 2
Table A - 3 Read Commands
Write Commands
All write commands are dispatched with specific number of data bytes
which are written to specified parameters after parsing process. In case of a
single sensor the parameters of disconnected sensor are also
included in the request data although those can be set at 0. The response of
a write command is the same as the request. The details are provided in the
Table A - 4.
Command 140 – Write Real Time Clock – Response/Request Length: 18 Bytes
Total Operation Time (In Minutes) Channel 1
To Next Page
Loading...
