Oldham MX 32 - Page 64

60
MX 32v2
User Manual
66
Alarm
active?
2
Configuration per bit
Al active inst, avg: 1, 2, 3.
bit6
bit5
bit4
bit3
bit2
bit1
bit0
0 = inactive
1 = active
Alarm avg 3
Alarm avg 2
Alarm avg 1
Alarm inst 3
Alarm inst 2
Alarm inst 1
67
Acknowl
alarm?
(Auto/manu)
2
Configuration per bit
Manual acknowl Al 1, 2, 3,
verification
bit7
bit6
bit5
bit4
bit3
bit2
bit1
bit 0
Verification
1 = Manual acknowl and 0 =
Automatic Acknowl.
When the Verification is at 1,
the Verification alarm, once
activated, is deactivated by
stopping the sensor.
If the acknowledgment is
manual, alarms 1, 2 or 3,
once activated, are
deactivated using the
acknowl button +
measurement < alarm.
1 = verification
put 0 mandatory
put 0 mandatory
put 1 mandatory
put 0 mandatory
1=Al3 ackmanu
1=Al2 ackmanu
1=Al1 ackmanu
68
Increasing or
decreasing
alarm?
2
Configuration per bit
Al 1, 2, 3 instantaneous or
average increasing or
decreasing
1: increasing
0: decreasing
Alarm avg 3
Alarm
avg 2
Alarm avg 1
Alarm inst 3
Alarm inst 2
Alarm inst 1
Table of registers (below)