46
2. To lower
the
right side of the second
seat
into
load floor position, proceed
as
follows:
a. Unlock the seat back by pushing
downward the
linkage lock lever;
then, pull seat back down.
b. Lift up seat back
filler panel and
place it
in
load floor position.
c.
Push down on
front
of seat back
until rear of filler panel
is
locked in
load floor position.
3. The
left side
of
the
second seat can be
lowered into load floor position from
either side of
the
car as follows:
a.
From right side
of
car - with right
seat (1/3 seat)
in
forward or load
floor
position, pull lock remote
control handle and pull seat back
down
to
load floor position.
Complete operation,
as
described
in
2b
and 2c.
b. From
left side of car -
pu
II
the
seat
back
lock lever on the left side of
the
seat back forward
to
. release
lock;
then, pull the seat back
down
to
load floor position. Complete
operation, as described
in
2a and 2b.
4. To raise either
the
right
or
left second
seat back, push down on
front
of seat
back
to
release hinged filler panel. Fold
hinged filler panel forward
onto
seat
back. Lift seat back upward
until it
locks into seat position.
5. To
lower
the
third seat
to
load floor
position proceed as follows:
To Next Page
Loading...
