2-4 d-Color MF 3300/3800
Operations required to use this function
2
2.2
2.2 Operations required to use this function
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
Checking the network settings
Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
dReference
If no IP address is assigned to this machine, you will need to configure the network. For details, refer to Chap-
ter 4 in [Quick Guide].
Configuring the Internet fax environment
Enable the Internet fax function. In addition, specify the information of this machine and settings required to
send and receive E-mail.
For details on the setting procedure, refer to Chapter 2 in [User's Guide Applied Functions].
Registering TTI
Register the machine name, company name, etc. to be printed on faxes.
To configure settings: [Utility] - [Administrator Settings] - [Fax Settings] - [Header Information] - [Sender]
Setting the date and time for the machine
Set the date and time on this machine to be printed on sent and received faxes.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Date & Time Settings]
dReference
If an NTP (Network Time Protocol) server is used to set the time, the date and time on this machine can be
adjusted automatically. For details, refer to Chapter 1 in [User's Guide Applied Functions].
To Next Page
Loading...
Need help?
General
