d-Color MF 3300/3800 5-7
5.4 Stopping fax printing at night (Night RX)
5
5.4 Stopping fax printing at night (Night RX)
Night RX
Night RX is a function that prohibits printing of faxes that are received in the pre-specified nighttime zone.
Faxes received in the night time zone are collectively printed after the specified night time zone has been
elapsed.
Night RX cannot be used together with the following functions:
Memory RX, Forward TX, TSI Routing, PC-Fax RX
Operations required to use this function (for administrators)
To use Night RX, the following settings are required.
- Select [Utility] - [Administrator Settings] - [Fax Settings]-[Function Settings] - [Nighttime RX Settings] -
[Night Fax RX Print], then enable the Night RX function (default: [OFF]).
- Select [Utility] - [Administrator Settings] - [Fax Settings]-[Function Settings] - [Nighttime RX Settings] -
[Night RX Start Time], then specify the time to start the night time zone.
- Select [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Nighttime RX Settings]
- [Night RX End Time], then specify the time to end the night time zone.
To Next Page
Loading...
Need help?
General
