UNIX> 70
The Ethernet address (MAC address) 00:80:87:01:00:D2
in the above example can be determined from the network
card self-diagnostic test.
3. Use the ping command to confirm the connection with the
network interface card.
Example: for IP address 192.168.20.127
# ping 192.168.20.127
If there is no reply, there is a problem with the
configuration of the IP address (the IP address has already
been set manually or dynamically), or with the network.
Reset the network interface card settings to default and try
to set a temporary IP address.
If you still have the problem after resetting the network
interface card, consult the network manager.
4. Login to the network interface card using TELNET.
Example: Logging in to IP address 192.168.20.127
#telnet 192.168.20.127
Trying 192.168.20.127
Connected to 192.168.20.127
Escape character is ‘^]’.
EthernetBoard 8100e Ver 01.50 TELNET server
login: root
‘root’ user needs password to login.
password: <CR>
User ‘root’ logged in.
No. Message Value (level .1)
1 : Setup TCP/ IP
2 : Setup SNMP
3 : Setup NetWare
4 : Setup EtherTalk
5 : Setup NetBEUI
6 : Setup printer trap
7 : Setup SMTP (Email)
9 : Maintenance
10 : Setup printer port
11 : Display status
12 : IP Filtering Setup
97 : Network Reset
98 : Set default (Network)
To Next Page
Loading...
Need help?
General