Olivetti Fax_Lab 710 - Page 12

10
5. Press the key:
The display shows the default language, for example:
LANGUAGE
ENGLISH
6. To display the other available languages, press the
keys:
7. To confirm your choice, press the key:
8. To return the fax machine to its initial stand-by mode,
press the key:
9. If you want to move back one function, press the key:
TO SET THE DATE AND TIME FOR THE FIRST TIME
The first time you connect the fax machine to the
power supply or whenever there is a power failure
you must set the date and time as described below.
The date and time will be printed at the top of all docu-
ments sent and will be shown on the display when the
fax is in stand-by mode.
Once set, the date and time can be changed at any time.
You can also modify the format in which they are shown
on the display, see "To change the date and time".
The display shows "AUTOMATIC 00" ("AUTOMATIC"
in the base model) on the first line and "SET DATE/
TIME" on the second line.
1. Press the key:
The display shows:
MENU
SET DATE/TIME
2. Press the key:
The display shows:
SET DATE/TIME
XX-XX-XX XX:XX
"XX-XX-XX XX:XX" indicate the date and time shown
on the display for the first time having connected the fax
machine.
3. To enter the new date and time (e.g. 10-09-07; 12:25),
press the keys:
- As each digit is entered, the cursor will move to the next
one.
4. If you wish to move the cursor to digits to be modified,
press the keys:
| / }
5. Then overwrite the digits with the correct ones, by press-
ing the keys:
-
2. Press the keys
until the display shows:
MENU
INSTALLATION
3. Press the key:
The display shows:
INSTALLATION
STATION NAME
4. Press the keys
until the display shows:
INSTALLATION
COUNTRY SET-UP
5. Press the key:
The display shows the default country, for example:
COUNTRY SET-UP
U.K.
6. To display the other available countries, press the keys:
7. To confirm your choice, press the key:
8. To return the fax machine to its initial stand-by mode,
press the key:
9. If you want to move back one function, press the key:
TO CHANGE THE LANGUAGE ONLY
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
INSTALLATION
3. Press the key:
The display shows:
INSTALLATION
STATION NAME
4. Press the keys
until the display shows:
INSTALLATION
LANGUAGE