Olivetti Fax_Lab 710 - Page 13

11
6. To confirm the setting, press the key:
The fax machine automatically returns to its initial stand-
by mode.
notE
Stand-by mode is the status in which the fax machine is idle
and is the mode in which the machine can be programmed.
Stand-by mode will be shown on the display as follows:
• Without the original document inserted in the ADF.
For the model with a built-in TAD:
AUTOMATIC 00
10-Sep-07 12:25
For the base model:
AUTOMATIC
10-Sep-07 12:25
• With the original document inserted in the ADF.
DOCUMENT READY
NORMAL
TO CHANGE THE DATE AND TIME
If the date and time shown on the display are not cor-
rect, you can change them at any time.
Bear in mind that if you have the caller ID function ena-
bled, the date and time will be automatically brought up
to date whenever you receive a call.
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
FAX SET-UP
3. Press the key:
The display shows:
FAX SET-UP
DATE AND TIME
4. Press the key:
The display shows:
DATE AND TIME
SET DATE/TIME
5. At this point, you can choose between the following
options:
"SET DATE/TIME" - To modify the date and time set
previously.
"DATE FORMAT" - To choose the date format that will
be shown on the display.
"HOUR FORMAT" - To choose the time format that will
be shown on the display.
6. Press the key:
The display shows:
SET DATE/TIME
XX-XX-XX XX:XX
"XX-XX-XX XX:XX" indicate the current date and time.
7. To display one of the options listed above, press the
keys:
8. To confirm the setting, press the key:
9. If you have made a mistake or wish to abort the proce-
dure in progress, press the key:
notE
If you have chosen the "SET DATE/TIME" option, proceed as
follows:
1. Enter the new date and time (e.g. 13-09-07; 18:00), by press-
ing the keys:
- . As each digit is entered, the cursor will
move to the next one.
2. If you wish to move the cursor to digits to be modified, press
the keys:
| / } .
3. Then overwrite the digits with the correct ones, by pressing
the keys:
- .
4. To confirm the setting, press the key:
.
5. To return the fax machine to its initial stand-by mode, press
the key:
.
6. If you want to move back one function, press the key:
.
If you have chosen the "DATE FORMAT" option, proceed as
follows:
1. The display shows: "DATE FORMAT" and "DD/MM/YY".
2. If you want to select a different format from the one displayed,
press the keys:
.
3. To confirm the setting, press the key:
.
4. To return the fax machine to its initial stand-by mode, press
the key:
.
5. If you want to move back one function, press the key:
.
If you have chosen the "HOUR FORMAT" option, proceed as
follows:
1. The display shows: "HOUR FORMAT" and "24 HOURS".
2. If you want to select a different format from the one displayed,
press the keys:
.
3. To confirm the setting, press the key:
.
4. To return the fax machine to its initial stand-by mode, press
the key:
.
5. If you want to move back one function, press the key:
.