Olivetti PG L2555 - (2) Detaching and refitting the paper feed driving motor unit; (3) Detaching and refitting the power source fan motor

1
-5-30
(2) Detaching and refitting the paper feed driving motor unit
Procedure
1. Remove the right upper cover.
(See page 1-5-4)
2. Remove the right lower cover.
(See page 1-5-4)
3. Pull the connectors of clutches an
d
sole
noid out.
4. Remove three screws and then remove
the paper feed driving motor unit.
5. Check or replace the paper feed drivin
g
mo
tor unit and refit all the remove
d
pa
rts.
Figure 1-5-49
(3) Detaching and refitting the power source fan motor
Procedure
1. Remove the right upper cover.
(See page 1-5-4)
2. Remove the right lower cover.
(See page 1-5-4)
3. Pull the connector of the power source
fan motor wire out.
4. Release three hooks using flat-blade
screwdriver and then remove the powe
r
source fan
motor assembly.
5. Check or replace the power sour
ce fan
mo
tor and refit all the removed parts.
Figure 1-5-50
Connector
Connectors
Paper feed
driving motor unit
Screw
Screw
Hook
Hooks
Connector
Power source fan
motor assembly
Power source
fan motor wire