CHSF
(1) Light source:
(2) Weight:
6V 20W Halogen lamp
In-base transformer
Light adjustment with resistor coil.
Fuse holder
Detachable main cord
6.2 kg
CHT-F
(1) Light source:
1 OOV 30W Tungsten lamp
Light adjustment with resistor coil
Fuse holder
(2) Weight:
Detachable main cord
5.8 kg
CHD-F
(1) Mirror:
50 mm dia mirror is available
Plug-in type mount
(2) Illuminator:
Mounting hole: 5 mm ,i.03 mm
Attachable substage illuminator (LSK) is available
Plung-in type mount
(3) Dimensions:
(4) Weight:
Mounting hole: 5 mm +to3 mm
180 mm (W) x 223 mm (D) x 262 mm (H)”
* 370 mm (H) with binocular tube
4.9 kg
CH2-CD (Two lens condenser for CH2)
(1) Mounting onto the microscope:
Condenser is inserted into substage sleeve and clamped.
(2) Numerical aperture:
NAI .25 (immersed)
(3) Iris diaphragm:
Iris opening from 1.7 mm - 29 mm, variable
(4) Type of illumination:
Bright field illumination.
Dark field illumination is available if an optional dark field stop is
used.
(5) Filter:
(6) Special accessories:
Phase contrast illumination is also available with optional ring slits.
Cobalt filter is available with a filter holder or auxiliary lens.
(Snap-in type)
1. Filter holder
2. Auxiliary lens
3. Ring slit
CH-2FH (Filter holder for CH2)
(1) Mounting onto the condenser:
Filter holder is mounted on the condenser with snap-in type spring
design.
(2) Filter size:
32,5 mm dia cobalt filter
(3) Accessory:
Dark field stop
-4-
To Next Page
Loading...
