Olympus CKX53 - Objective; Optional Units

30
6-3 Optional units
Item Specifications
Phase contrast slider
· Applicable units
Slit for IC observation
CKX3-SLPIC
Applicable objective PLCN10X, CACHN10XIPC
Applicable slider CKX3-SLP, IX2-SL
AS ring for 2X
CKX3-SLPAS
Applicable objective PLN2X
Applicable slider CKX3-SLP, IX2-SL
Centering phase
contrast slider IX2-SL
Ring slit Centering adjustment type PHL aperture (provided
with centering adjusting tools)
Holes for inserting the
option phase contrast
ring
Hole for inserting the centering adjustment type IX2-
SLPH1, IX2-SLPH2
Ø45 mm empty hole
PH1 phase contrast
ring IX2-SLPH1
Applicable objective UPLFLN10X2PH, LUCPLFLN20XPH
Applicable slider IX2-SL
PH2 phase contrast
ring IX2-SLPH2
Applicable objective LUCPLFLN40XPH
Applicable slider IX2-SL
Specimen holder Dimensions 128 mm x 86 mm
Dimension of container
holding portion
( ) indicates a hole size.
a
Petri dish holder IX-
HOP
Ø38 (Ø30 mm)
Ø54 (Ø48 mm)
Ø65 mm (Ø58 mm)
Use by overlaying 3 plates.
6-2 Objective
Objective
NA W.D. Phase contrast
(applicable ring)
IC (Inversion
contrast)
Fluorescence
B-excitation G-excitation U-excitation
PLN2X 0.06 5.8 - - - - -
PLCN4X 0.1 18.5 - - - - -
PLCN10X 0.25 10.6 - ¦ - - -
UPLFLN4XIPC 0.13 16.4 Provided with
CKX3-SLP
- ¦ ¦ ¦
CACHN10XIPC 0.25 8.8 Provided with
CKX3-SLP
¦ ¦ ¦ -
LCACHN20XIPC 0.4 3.2 Provided with
CKX3-SLP
- ¦ ¦ -
LCACHN40XIPC 0.55 2.2 Provided with
CKX3-SLP
- ¦ ¦ -
UPLFLN4XPH 0.13 17 Provided with
IX2-SL
- ¦ ¦ ¦
UPLFLN10X2PH 0.3 10 IX2-SLPH1 - ¦ ¦ ¦
LUCPLFLN20XPH 0.45 6.6 - 7.8 IX2-SLPH1 - ¦ ¦ ¦
LUCPLFLN40XPH 0.6 3 - 4.2 IX2-SLPH2 - ¦ ¦ ¦