Olympus CKX53 - Appendix; Summary of Procedures of Bright Field Observation; Phase Contrast Observation

47
CKX53
9-1 Summary of procedures of bright field observation / phase contrast observation
(Operation portion) (Page)
8Filter holder for transmitted light
illumination (page 41)
1Main switch (page 12)
2Brightness adjustment knob (page 14)
(page 11)
3Revolving nosepiece (page 13)
|Coarse focusing knob (page 14)
5Fine focusing knob (page 14)
2Brightness adjustment knob (page 14)
aDiopter adjustment ring (page 19)
9Binocular portion (page 19)
3Revolving nosepiece (page 13)
|Coarse focusing knob (page 14)
5Fine focusing knob (page 14)
7Aperture iris diaphragm lever (page 13)
(Phase contrast standard set only)
bX-axis knob (page 14)
cY-axis knob (page 14)
6Pre-centered phase contrast slider (page 12)
9 Appendix
The numbers assigned to operating portions indicate operating portions described in "2-1 Bright field set /
Phase contrast entry set / Phase contrast standard set" (page 8).
TIP
Press the main switch of the microscope frame.
Place the specimen on the stage.
Engage a low magnification objective in the light path.
Bring the specimen into focus.
Engage the objective to be used in the light path and bring the
specimen into focus.
With the phase contrast observation, slide the pre-centered phase
contrast slider CKX3-SLP and engage the optical element suitable for
the objective in the light path.
Adjust the aperture iris diaphragm.
Adjust the interpupillary distance
Adjust the diopter
Engage the required filters.
Adjust the brightness.
Start observation.
Observation Procedures
Move the specimen.
• Attach the objectives suitable for observation methods.
• Attach the pre-centered phase contrast slider CKX3-SLP (for phase contrast observation).
Preparation