24
DP73
· If the acquired field is as shown in Fig. 8, use a camera adapter
having magnification of 0.5X to 1X. (If a 0.35X camera adapter is
used, the peripheral part of the image will be obscured.)
· If a C-mount camera adapter from other manufacturer than
Olympus is used, the optical performance of the system may not
be manifested fully.
Be careful in using other manufacturer’s C-mount camera
adapter or C-mount lens having a thread length
c
over
4.5 mm. Otherwise, the threaded section will hit the inside of
the camera head and cause damage to it.
Be sure to adjust the parfocality between the C-mount camera
adapter and the eyepieces. Otherwise, the image through the
camera and the image through the eyepieces are not parfocal.
For the parfocality adjustment method, refer to the instruction
manual for the camera adapter in use.
CAUTION
Fig. 8
0.63X (FN 14)
0.5X (FN 17.6)
1X (FN 8.8)
Field number 22
c
To Next Page
Loading...
