Olympus OEV261H - Chapter 8 Care, Storage, and Disposal; Monitor Care and Cleaning

Chapter 6 Submenu Operations
53
High definition LCD monitor OEV261H
MONO Enables or disables monochrome display.
When COMP. input is selected, the set value is — (line). This cannot be selected, nor any other
selection can be made.
• OFF (default value) ....................... Color display
• ON................................................. Monochrome display
PHASE Adjusts phase.
When COMP. input is selected and the MONO function is on, the set value is — (line). This
cannot be selected, nor any other selection can be made.
0 – 60 (default value: 30)
CHROMA Adjusts chroma.
When COMP. input is selected and the MONO function is on, the set value is — (line). This
cannot be selected, nor any other selection can be made.
0 – 60 (default value: 25)
BRIGHT Adjusts brightness.
0 – 60 (default value: 30)
CONTRAST Adjusts contrast.
0 – 60 (default value: 50)
SHARPNESS
MODE
Selects the width of outline correction edge.
• HIGH (default value)...................... Thin edge
• LOW .............................................. Wide edge
SHARPNESS H Sets horizontal sharpness.
When COMP. input is selected, the set value is — (line). This cannot be selected, nor any other
selection can be made.
• 0 – 30
SHARPNESS V Sets vertical sharpness.
When COMP. input is selected, the set value is — (line). This cannot be selected, nor any other
selection can be made.
• 0 – 30
Submenu Description