OM SYSTEM VN-541PC - Turning the Power on; Setting the Time;Date

1
7
EN
Setup
Setup
Turning the power ON
1
While the voice recorder is turned
off, press and hold the o button.
TIP
• If you install batteries for the first time
or replaced with new ones, the [hour]
indicator will flash automatically when
the power is turned on.
Setting the time/date
Set the time and date beforehand to enable
easier management of recorded files.
1
Press the 9 (p) or 0
button to select the desired
setting item.
2
Press the + or – button to change
the number.
• To change the setting of another item,
press the 9 or 0 button to move
the blinking cursor, then press the + or
– button to change the number.
3
Press the p button to finalize
the setting.