1
19
Getting started
EN
Inserting/removing a microSD card
Removing a microSD card
1
While the voice recorder is
in stop mode, open the card
cover.
2
Release the microSD card by
pressing it inward, then letting
it slowly return.
• The microSD card moves outward
and stops. Pull the microSD card
out with your fingertips.
• If [Memory Select] was set to
[microSD card], [Internal memory
selected] is displayed after
removing a microSD card.
3
Close the card cover.
NOTE
• MicroSD cards may pop out
forcefully on removal if you flick or
release your finger too quickly after
pressing the card in.
• Depending on the card’s
manufacturer and type, some
microSD cards and microSDHC
cards may not be fully compatible
with the voice recorder and not be
recognized properly.
• For microSD card compatibility,
please visit our website’s customer
support page.
Note that our customer support will
provide information on microSD card
manufacturers and card types for
which we have verified operation, but
will not guarantee their performance.
Also note that some cards may
no longer be recognized correctly
by the voice recorder in case
card manufacturer changes card
specifications.
• Read the operating instructions
provided with the card when using a
microSD card.
• If a microSD card is not recognized
by the voice recorder, try removing
and reinserting the card to have the
voice recorder recognizing the card
again.
• Processing speed may be low
for some microSD card types.
Processing performance may also
be reduced by writing or deleting
data repeatedly from a microSD
card. In this case, reinitialize the card
(
g
P. 70).
To Next Page
Loading...
Need help?
General
