OM SYSTEM WS-883 - Voice Sync Recording Function [V-Sync. Rec]

4
Menu
60
EN
Recording menu [Rec Menu]
TIP
• Increasing the setting number
increases the VCVA activation
sensitivity, enabling quieter sounds
to activate the start of recording.
• Adjust the VCVA voice activation
level to suit the recording conditions
(to cope with high levels of
surrounding noise or alike).
• To avoid recording mistake, it’s
recommended to perform a test
recording beforehand to adjust the
voice activation level.
NOTE
• The following functions are disabled
when using the [VCVA] function:
• [Rec Scene] (
g
P. 31)
• [V-Sync. Rec] (
g
P. 60)
• [Auto index] (
g
P. 62)
Voice sync recording function
[V-Sync. Rec]
The voice sync recording function
automatically starts recording when
a sound louder than a preset voice
sync recording level (detection level)
is detected, and automatically stops
recording when the sound volume level
decreases. When copying music from
another device connected to the voice
recorder, use the voice sync recording
function to detect the silent intervals
between music tracks and save each track
as a separate file.
[1 sec.], [2 sec.], [3 sec.], [5 sec.]:
Set the detection time. The voice
recorder enters standby mode when
the input (recording level) is below
the preset level for at least the set
detection time.
[Off]:
Recording is done normally.