4
Menu
61
EN
Recording menu [Rec Menu]
Adjusting the voice sync level for voice
sync recording
1
Press the
REC
( K) button to
prepare for recording.
2
Press the M or L
button to
adjust the voice sync level.
a Voice sync level (moves left/right
to match set level)
• The voice sync level can be
adjusted to a setting between [01]
and [15].
•
Increasing the setting number
increases the activation sensitivity,
enabling quieter sounds to activate
the start of recording.
3
Press the
REC
( K) button
again.
• The blinking message [Standby]
appears in the display, and the LED
indicator light flashes.
• Recording starts automatically if the
input is louder than the voice sync
level.
TIP
• The voice recorder automatically
ends recording and returns to
recording standby mode when the
input sound has been below the
voice sync level for at least the set
detection time. Each time the voice
recorder enters standby mode, the
current file is closed. Recording
continues in a new file the next time
sound is detected.
• Press the
STOP
( J) button to end a
voice sync recording session.
NOTE
• The following functions are disabled
when using the [V-Sync. Rec]
function:
• [Rec Scene] (
g
P. 31)
• [VCVA] (
g
P. 59)
• [Auto index] (
g
P. 62)
To Next Page
Loading...
Need help?
General
