3
Playback
37
EN
Playback
In addition to files recorded by the voice recorder, you can also play WAV or MP3 format
files transferred from a PC.
Basic playback procedure
1
Select the file to play from the
folder containing it (
g
P. 25).
TIP
• Files are saved in the locations
below.
Files recorded by the voice
recorder:
Stored in the [Recorder]
folder
([
]-[ ] folders)
Music files transferred from a
computer:
Stored in the [Music] folder
Podcast files transferred from
a computer:
Stored in the [Podcast] folder
2
Press the N
OK
button to start
playback.
a File name and folder indicator
b Elapsed playback time/File length
c Playback position bar indicator
3
Press the
+
or
–
button to
adjust the volume to the
desired level.
• The volume can be adjusted to a
setting between [00] to [30]. The
higher the number, the louder the
volume.
• If the volume is set too loud, a
warning screen may appear.
4
Press the
STOP
( J) button to
stop playback.
• The file being played stops right
away. The resume function
automatically stores the playback
stop position in memory. The
position is retained even if the power
is turned OFF. The next time the
power is turned ON, playback can
be resumed from the stop position
stored in the memory.
Playback
To Next Page
Loading...
Need help?
General
