4
Menu
71
EN
Device menu [Device Menu]
NOTE
• Never format the voice recorder from
a PC.
• Formatting erases all the existing
data, including locked files and
read-only files.
• Before formatting, charge or
replace the battery to ensure it will
not run out before the process is
finished. The formatting process can
sometimes take over 10 seconds
to complete. To prevent the risk
of damage to data, never attempt
to perform any of the following
processes before a formatting
process has finished:
1 Removing the battery
2 Removing the microSD card
(if the recording media to be
initialized is a [microSD card]).
• If there is a microSD card in the
voice recorder, make sure [Internal
memory] or [microSD card] has
been correctly selected as the
recording media to erase (
g
P. 68).
• Even when formatting or erasing
(
g
P. 48) is performed, only the file
management information of the
internal memory and/or microSD
card is updated and the recorded
data is not completely erased.
When disposing of a microSD card,
be sure to destroy the card, format
the card and record silence until the
recording time runs out, or perform a
similar operation in order to prevent
the leakage of personal information.
Checking recording media
information [Memory Info.]
You can display the capacity and
remaining memory space of the recording
media from a menu screen.
NOTE
• Some recording media memory
capacity is used as a management
area, so the actual usable capacity
will always be slightly less than the
displayed capacity.
Checking voice recorder
information [System Info.]
You can display voice recorder information
from a menu screen.
• The voice recorder’s [Model], [Version]
(system version) and [Serial No.]
information is displayed.
To Next Page
Loading...
Need help?
General
