1
Getting started
20
EN
Setting the voice recorder to HOLD mode maintains the current operation and disables
button operations. HOLD mode is a handy feature for preventing unintentional operation
from accidentally pressing the button when the voice recorder is carried in a bag or
pocket. It is also useful for preventing the voice recorder being accidentally stopped
during recording.
Setting HOLD mode
1
While the recorder is in
recording mode or playback
mode, slide the
POWER
switch
to the [
OFF/HOLD
] position.
• [Hold] appears in the display, and the
recorder enters HOLD mode.
Releasing HOLD mode
1
Slide the
POWER
switch to the
[
ON
] position.
NOTE
• When any button is pressed during HOLD mode, [Hold] appears in the display for 2
seconds. No other operation is performed.
• Setting HOLD mode during voice recorder playback (or recording) continues the
playback (or recording) operation and prevents any other operation from being
performed (The power turns off when playback ends or when recording ends
because, for example, there is no remaining memory space).
Preventing accidental operation
To Next Page
Loading...
Need help?
General
