4
Menu
59
EN
Recording menu [Rec Menu]
Reducing noise during recording
[Low Cut Filter]
With the voice recorder's low cut filter
function you can make recordings that
reduce humming sounds from air-
conditioners or low-frequency sounds from
equipment such as projectors.
[On]:
Turns the low cut filter on.
[Off]:
Turns the low cut filter off.
Voice-activated recording
function [VCVA]
The voice-activated recording function
(VCVA) automatically starts recording
when a sound louder than a preset
voice activation level is detected, and
automatically pauses recording when
the sound volume level falls. Use this
function to automatically omit unneeded
quiet segments when recording (such as
long silences during conferences), saving
memory.
[On]:
Turns VCVA on. You can adjust the
voice activation level used for VCVA.
[Off]:
Turns VCVA off. Restores standard
recording.
Adjusting the voice activation level for
voice-activated recording
1
Press the
REC
( K) button to
start recording.
• Recording pauses automatically
about 1 second after the input
sound becomes quieter than the set
activation sensitivity.
The blinking message [Standby]
appears in the display. The LED
indicator light becomes lit when
recording is activated and flashes
when recording is paused.
2
Press the M or L button
to adjust the voice activation
level.
a Voice activation level (moves left/
right to match set level)
b Level meter (changes in
proportion to recording sound
volume)
• The setting can be adjusted to
between [01] and [15].
To Next Page
Loading...
Need help?
General
