1
Getting started
12
EN
Charging the battery
Charging the battery by connecting to a PC’s USB connector
WS-883 model only
NOTE
• Before charging the battery, insert
the rechargeable battery provided
and set [Battery] to [Ni-MH] (
g
P. 8,
P. 68).
1
Start the PC.
2
Slide the USB connector slide
lever in the direction of the
arrow.
3
After making sure the voice
recorder is stopped, connect
the USB connector to a USB
port on a PC.
4
Press the N
OK
button to start
charging the battery.
• When [Battery] (
g
P. 68) is set
to [Ni-MH], [Press OK to start
charging] appears on the display.
Press the N
OK
button while this
message is blinking.
To Next Page
Loading...
Need help?
General
