2
Recording
35
EN
Recording from another connected device
6
Connect the voice recorder
with another device using the
connecting cord KA333.
7
Press the
REC
( K) button to
start recording.
8
Start playback on the other
device.
9
When duplication is
completed, press the
STOP
(J)
button to stop recording.
• When [Duplication (Timer)] was
selected, recording automatically
stops when the set time is reached.
NOTE
• Do not plug or unplug devices into
voice recorder jacks while recording.
• Perform adjustment of the recording
level on the other device.
• To ensure successful recording, we
recommend that you test the record
function and volume before use.
• In [Duplication (Auto Divide)], an
original recording will be copied to
separate files divided into each song
by the signal level or the noise level
of a silent part. When the signal level
is too low or the noise is significant,
recording and division may not be
performed properly.
In that case, select [Duplication
(Timer)] and manually start and stop
recording.
• If the connecting cord is not
connected when [Duplication] is
selected, the message [Connect
an audio cable to the mic jack] is
displayed.
To audio output
terminal of other device
To microphone
jack
To Next Page
Loading...
Need help?
General
