Omega C9000A SERIES User Manual

43
.36 (Cont'd) LIMIT (LATCHING) CONTROL (OUTPUT 2)
.37 (Not used)
FUNCTIONS .38 -.49 ARE PERFORMANCE DIAGNOSTICS
.38 RESETS FUNCTIONS .39 TO.42
FUNCTIONS .39 through .49 can only be READ.
To read, press ★
.39 READ TEMPERATURE VARIANCE
.40 READ MAXIMUM TEMPERATURE
.41 READ MINIMUM TEMPERATURE
.42 READ DUTY CYCLE MONITOR
.43 READ AUTOTUNING OVERSHOOT 1
.44 READ AUTOTUNING OVERSHOOT 2
.45 READ AUTOTUNING UNDERSHOOT
Only for: SP2 ON/OFF mode Function .19/Options 1 through 5.
PRESS simultaneously to reset (in non-alarm condition).
Reads the difference between the maximum and minimum
temperatures (0.1° resolution). Press ★ to read.
Monitors power (SP1 % on time) in previous proportioning cycle.
Average several readings for more accurate result. Refer to
Section 4.3.2. Press ★ to read.
Measured in °C/°F, maximum 255°/Hi-Res 25.5°. Refer to Section
4.3.3. Press ★ to read.
Display shows Function .38 (0.38) after getting to Function .13.
Read maximum temperature in °F or °C. Press ★ to read.
Measured in °C/F°, maximum 255°/Hi-Res 25.5°. Press ★
Measured in °C/°F, maximum 255°/Hi-Res 25.5°.
Reads minimum temperature in °F or °C. Press ★ to read.
TABLE 3-6 (Cont'd)
FUNCTION
(Op#).(Fn#) Parameter/Comment
0.38 Off
1.38 Start

Omega C9000A SERIES Specifications

General

Brand	Omega
Model	C9000A SERIES
Category	Temperature Controller
Language	English