38
Ensure that the jumper behind
the lower front bezel is on the
two right-most pins
To convert the display from
temperature readout to
Function/Option Mode:
Change to Function .13:
To get to the Advanced
Functions:
To change to another Function
number:
To select Option number:
To change Option number:
To exit Program Mode:
*Bold type means digit is flashing
†Temperature of sensor will be
displayed
STEP ACTION DISPLAY
1
2
3
4
5
6
7
8
Press P
Option 0
Function 0
(flashing)
Press
Press and hold ★
until .38 appears
Press to go up
press to go
down
Press ★
Option
(flashing)
Press or
as many times as
required to get
Option number that
you want
Press P
0.
1 3
0.
3 8
0.
4 2
0.
3 1
0.
3 1
1.
3 1
T E M P
0.
0
3.12 DETAILS OF ADVANCED FUNCTIONS .26-.50
The following steps describe the sequence of keys one must press
to change any of the Options related to Functions .26 through .50.
Access is gained into these Advanced Functions via Function .13,
as described below.
To Next Page
Loading...
Need help?
General
