Omega C9000A SERIES User Manual

0.5%Fixed Values 1%
Option No.
106723 45
2% 2.5% 3% 5% 10% 20% *
Using same value for T calculate "Derivative Time" (Function .6).
0.0530 6020105Fixed Values
Option No.
1
12 340 657
SECONDS
*On/Off
60
NOTE
If options 1, 2 or 3 are selected, it is recommended that
you use one of the CN9000A models that provides an
SSD output for SP1. Option 6 is only used for analog
output only (4-20 mA DC or 0-10 VDC output)
STEP
*For other fixed values, refer to Table 3-4.
9
10
Using value for T (time interval between consecutive highest
readings) calculate new value for "Proportioning Time"
(Function .4).
T
20
= seconds
T
10
= seconds
Use calculated value to select option number in Function .4 table
below. When between fixed values choose next shorter option.
10025 50105OutFixed Values
Option No.
1 230 546
SECONDS
*200
*For other fixed values, refer to Table 3-4.
Use calculated value to select option number in Function .6 table
below. When between fixed values choose next shorter option.
*For other fixed values, refer to Table 3-4.

Omega C9000A SERIES Specifications

General

Brand	Omega
Model	C9000A SERIES
Category	Temperature Controller
Language	English