25
Configuration Using Display (continued) Step Four
TOP-LEVEL MENU
The TOP-LEVEL MENU will continue to scroll
through the items listed to the right until the OK
button is pressed.
To return to the Normal / Operational mode of
LVU700 series, press OK while RUN appears
in the display.
How to enter the TOP-LEVEL MENU
1. Press and hold OK (approximately 5 seconds) until
MENU is displayed.
2. The TOP-LEVEL MENU items will rotate through
display.
3. Use OK to choose a MENU item.
How to exit the TOP-LEVEL MENU
In TOP-LEVEL MENU, press OK when RUN appears.
STEP 2 - SETTING THE UNITS OF MEASUREMENT (UNITS)
1. In the TOP-LEVEL MENU mode, select UNITS.
2. Press OK to choose between INCHES, CM
(centimeter), FEET or METERS.
a. To cancel UNITS, Select EXIT.
3. Select EXIT to return to the TOP-LEVEL MENU.
Note: LVU700 series will adjust the display when
measurement units are changed under UNITS. Example: If
you are in inches and the display reads 60.0, the display will
change to 5.00 when feet is selected as the unit of
measurement.
To Next Page
Loading...
