OMICRON 5
About this manual
About this manual
This User Manual provides information on how to use the MPD 800 test system safely, properly and
efficiently. The MPD 800 User Manual contains important safety rules for working with the MPD 800
acquisition unit and gets you familiar with operating the MPD 800 acquisition unit. Following the
instructions in this User Manual will help you to prevent danger, repair costs, and avoid possible down
time due to incorrect operation.
The MPD 800 User Manual always has to be available on the site where the MPD 800 acquisition unit
is used. The users of the MPD 800 acquisition unit must read this manual before operating the MPD 800
acquisition unit and observe the safety, installation, and operation instructions therein.
Reading the MPD 800 User Manual alone does not release you from the duty to comply with all national
and international safety regulations relevant to working on high-voltage equipment.
Safety symbols used
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible
To Next Page
Loading...
Need help?
General
