EasyManua.ls Logo

Omnitracs MCP50 - Problem: GPS Fix Test Fails; GPS Fix Problem

Omnitracs MCP50
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
80-JB566-1 Rev. G 18-1
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
18
GPS Fix Problem
Problem: GPS Fix Test Fails
For more detailed information concerning GPS status, use the GPS tab (screen below).
Normally the GPS positioning system will update positioning data every second at the
MCP50, as shown in the Last Update field of the System->GPS tab. The desired value for
the Mode field is 3-D, although No Fix may show when the antenna is temporarily blocked or
in a garage.
Precision: should be a value equal to 2 or less
Satellites: should show a value of 5 or more (Note: it is the first value shown)
1.00
7/12

Table of Contents