80-JB566-1 Rev. G 27-1
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
27
In-Cab Scanner Diagnostic Procedure
Overview
For scanners to work on the MCP50 both the application software and operating system must
meet the minimum requirements as described below.
Minimum Requirements
• Software version CA0921R.
• Windows CE operating system LT0038 and higher.
Scanner
The scanner is used to scan and send documents using the connected MCP50 system. The
scanner is connected to the MAS using a USB cable.
Normal Performance
The scanner sends a scan of a bill of lading or other paperwork associated with pick-ups and
deliveries.
To Next Page
Loading...