EasyManua.ls Logo

Omnitracs MCP50 - Page 76

Omnitracs MCP50
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Problem: Stuck on Acquiring Network Screen Acquiring Network Problem
24-2 80-JB566-1 Rev. G
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
1. Reseat the antenna connections to the VTM. Inspect the cable connections to ensure
there isn’t any damage.
2. If the problem persists after reseating the cable connections, test with a known-good
antenna. Ensure there are no obstructions above the antenna.
3. If the problem still continues, test with a known-good DIU.
4. If the problem still continues, test with a known-good VTM.

Table of Contents