Omron BA75T - Page 27

2 Installation and connection
2-1 Installation
4. Use the 8 included ear bracket mounting flat-head screws (2 sets of 4 screws) to
securely fasten the ear brackets to the left and right sides of the UPS. (4
4
4
* The support angles cannot be attached to special EIA/JIS racks.
5. Place the UPS on the support angles and push it completely into the rack (5, and use
the 2 included EIA/JIS rack fixing screws (M5) to securely fasten the ear brackets to the
server rack. (6
5
Push completely in
6
Use the unit fixing
screws to fasten
* Be sure to use the support angles.
BA75T/BA100T/BA100R
26