Omron BCM-500 - 5. Set-up Your Personal Data

9
Before using your monitor
5. Set-up Your Personal Data
For body composition measurement, it is necessary to set-up your personal data (birth date, gender,
height). The monitor can store this personal data for up to 4 persons.
• The personal data can be obtained from “OMRON HeartAdvisor” app once the app is paired with
your monitor.
1.
Press the button to turn on the power.
The power turns on. User ID “1” blinks. Birth date ( ) is displayed.
2.
Select and conrm your user ID.
Press the button to select your user ID and press the buttontoconrm.
3.
Set your birth date.
Press the button to set your birth date and press the button to
conrm.
• Setting range of year:1900 to 2045.
• While setting the year and date, hold down the
button to advance
rapidly in increments of 10.
4.
Set your gender.
Press the button to set your gender (MALE) or (FEMALE)
and press the
buttontoconrm.
5.
Set your height.
Press the button to adjust your height and press the button
toconrm.
• Press continuously to rapidly advance in increments of 1 inch
(or 10 cm).
•
Afterallthesettingsaredisplayedforyourconrmation,“0.0lb”
appears on the display.
Year
Month
Day