Omron BCM-500 - Operating Instructions; 6. How to Take a Measurement Accurately

10
6.
Step onto your monitor to take a measurement when “0.0 lb” is displayed.
The data of body weight and body composition are recorded in your monitor to support automatic
recognition.
After a while, the measurement results are indicated as follows.
7.
Step off your monitor after the measurement results are displayed.
Your measurement is now complete.
8.
Press the button (2 seconds or longer) to turn off the power.
To add a new user, start from the “Step 1”.
Operating instructions
6. How to Take a Measurement Accurately
6.1 Correct posture during the measurement
Take a measurement on
ahard,leveloor.
Caution
• DO NOT place the
monitor on a cushioned
oorsurfacesuchasa
carpet or mat. A correct
measurement may not
be possible.
Step onto your monitor
with your bare feet.
Place the arches of
your feet onto the
center of the monitor.
Note
• Stepping onto your
monitor with socks or
footwear on will result
in an inaccurate
measurement.
Do not bend your knees
during measurement.