Omron BCM-500 - 12. Change or Delete Your Personal Data; Care and Maintenance

17
Operating instructions
12. Change or Delete Your Personal Data
1.
Press the button to turn on the power.
The power turns on. User ID “1” blinks.
2.
Select your user ID.
Press the
button to select the user ID.
When the birth date ( ) is displayed,
Your personal data is not set-up in your user ID.
Set-up your personal data. (Refer to
Section 5.)
3.
Press the button to conrm your user ID.
“0.0 lb” is displayed.
4.
Press the button.
“CHANGE” and “DEL” blink.
5.
Select “CHANGE” or “DELETE” the personal data.
• Even if the personal data is changed, the measurement results will not be changed or deleted. When using the user
ID which has been used by another person, delete their personal data and then set-up the personal data again.
Change your personal data
(The measurement results won’t be deleted)
Delete your personal data
Note:these steps will only delete your data from the
monitor. To delete your data from the app, follow
instructions provided in the “support” section of the app.
(The measurement results will also be deleted)
1.
Press the button to select
“CHANGE”
2.
Press the button
The year blinks.
3.
Change “birth date”, “gender” and
“height” with reference to Step 3 –
Step 5 of
Section 5.
• To stop any change, press the
button (2
seconds or longer) to turn off the power.
• The untransferred measurement results will
not be changed.
1.
Press the button to select “DEL”
2.
Press the button
blinks.
3.
Press the button again