Omron BCM-500 - 11. Measure Weight Only

16
4.
Start Measurement when “0.0 lb” is displayed.
Step onto your monitor.
5.
Check your measurement results.
Your results will automatically rotate on the display.
6.
Press the button (2 seconds or longer) to turn off the power.
The power turns off if your monitor is not used for 3 minutes.
Operating instructions
11. Measure Weight Only
When this mode is used, your measurement result will not be recorded.
1.
Press the button to turn on the power.
The power turns on. User ID “1” blinks.
2.
Select and conrm “ ”.
Select “ ” with the button, and then press the buttontoconrm.
3.
When the “0.0 lb” is displayed, step onto your monitor.
4.
Check your measurement result.
Your weight is displayed and blinks to indicate that measurement is complete.
5.
Press the button (2 seconds or longer) to turn off the power.
The power turns off if your monitor is not used for 3 minutes.