18
Operating instructions
13.
Delete the Communication Setting
If you want to stop the use of the “OMRON HeartAdvisor” app or delete the communication settings
from your smart device, please operate as follows. All the communication settings recorded in your
monitor will be deleted.
1.
Press and hold the button more than 2 seconds.
“ ” and the Bluetooth symbol blink.
2.
Press and hold the button more than 2 seconds again.
“ ” and “CLr” blink.
3.
Press the button to conrm.
The power turns off if your monitor is not used for 10 seconds after “CLr” is
displayed.
Care and maintenance
14.
Maintenance and Storage
How to Clean your Monitor
• Before use, wipe your monitor with a soft dry cloth. If necessary, use a cloth moistened with water or
detergent and squeeze it well before wiping your monitor, then wipe off with a dry cloth.
• Do not use benzene or thinner, or other volatile solvents to clean your monitor.
• Do not wash your monitor with water.
Care and Storage
• Do not store your monitor in the following conditions:
- Humidity, where moisture or water may get into your monitor
- High temperatures, direct sunlight or dusty places
- Places with the risk of sudden shocks or vibrations
- In places where chemicals are stored or where corrosive gas is present
• Do not carry out repairs of any kind by yourself. This product is calibrated at the time of manufacture.
If at any time you question the accuracy of measurements, please contact your authorized OMRON
distributor.
To Next Page
Loading...
