Omron BCM-500 - 10. Guest Mode (Unrecorded Mode)

15
Operating instructions
10. Guest Mode (Unrecorded Mode)
When this mode is used, your measurement results will not be recorded.
1.
Press the button to turn on the power.
The power turns on. User ID “1” blinks.
2.
Select and conrm “ ”.
Select “GUEST” with the button, and then press the buttontoconrm.
3.
Enter personal data.
3.1 Set your birth date
Press the
button to set your birth date and press the button to
conrm.
• Setting range of year: 1900 to 2045.
• While setting the year and date, hold down the
button to advance
rapidly in increments of 10.
3.2 Set your gender
Press the
button to set your gender (MALE) or (FEMALE)
and press the
buttontoconrm.
3.3 Set your height
Press the
button to set your height and press the buttontoconrm.
• Press continuously to rapidly advance in increments of 1 inch (10 cm).
Afterallthesettingsaredisplayedforyourconrmation,“0.0lb”appearson
the display.
The power turns off if your monitor is not used for 1 minute after “0.0 lb” is displayed.
Year
Month
Day