Omron BCM-500 - 8. View Your Measurement Results on Your Smart Device

12
1.
Take a measurement when your monitor is off.
When you step onto your monitor, your monitor automatically turns on.
2.
When user ID and measurement results are displayed, the measurement is
complete.
Step off your monitor.
3.
Conrm your user ID.
■
If your user ID is correct…
Press the buttontoconrmyouruserID.
disappears.
Even if you turn the power off with
blinking,
the results are recorded on the monitor as the
measurement value linked to the displayed user ID.
■
If your user ID is incorrect…
Before the power turns off, select your user ID
manually with the
button, and then press the
button to conrm.
■
If you conrmed your user ID incorrectly…
Before the power turns off, press the button so that you can select your user ID again.
If “no 1” to “no 4” blinks on the display, or
GUEST is displayed, your personal data has
not been set-up in your monitor.
Set-up your personal data.
You can use Guest Mode as well.
or