208
Connector Terminals Section 5-2
• Models with MIL Connector
All dimensions are in mm.
Mounting Methods Connector Terminals can be mounted using any of methods 1 to 4 below.
1,2,3... 1. Mounting Directly to DIN Track (Mounting Brackets Not Required)
a) Hook over the top of the DIN Track, then press the Connector Terminal
against the DIN Track.
(82)
Connector side
facing front
DIN Track
a. Hook over top of DIN Track.
b. The DIN Track Mounting Hook will engage automatically when
the Connector Terminal is pressed against the DIN Track.
DIN Track
To Next Page
Loading...
