Omron CJ Series User Manual

4-13
4 Data Exchange with the CPU Unit
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
4-2 Device Variables for CJ-series Unit (Software Switches, Statuses)
4
4-2-2 Global-Control Command (*_GlobCtlCmd)
Name of Device Variable for CJ-
series Unit
Type R/W Description Function
*_GlobCtlGrp1 BOOL RW Send com-
mand to slaves
of Group 1
TRUE:
Slaves devices assigned to the specific group
will process the global-control command.
FALSE: Slave devices assigned to the specific
group will not process the global-control com-
mand.
Selecting all slaves (i.e. a Broadcast command)
requires all bits in this range to be set to
FALSE.
*_GlobCtlGrp2 BOOL RW Send com-
mand to slaves
of Group 2
*_GlobCtlGrp3 BOOL RW Send com-
mand to slaves
of Group 3
*_GlobCtlGrp4 BOOL RW Send com-
mand to slaves
of Group 4
*_GlobCtlGrp5 BOOL RW Send com-
mand to slaves
of Group 5
*_GlobCtlGrp6 BOOL RW Send com-
mand to slaves
of Group 6
*_GlobCtlGrp7 BOOL RW Send com-
mand to slaves
of Group 7
*_GlobCtlGrp8 BOOL RW Send com-
mand to slaves
of Group 8
*_GlobCtlUnfreezeCmd BOOL RW Unfreeze TRUE:
The Unfreeze command will be send to the tar-
geted slave devices.
The Unfreeze command releases the targeted
slave devices from the Freeze mode (see
below).
FALSE:
The Unfreeze command will not be transferred
to the slave devices.

Omron CJ Series Specifications

General

Brand	Omron
Model	CJ Series
Category	Controller
Language	English