Omron CJ Series User Manual

35
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
Related Manuals
The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NJ-series CPU Unit
Hardware User’s Manual
W500
NJ501-
□□□□
Learning the basic specifi-
cations of the NJ-series
CPU Units, including intro-
ductory information,
designing, installation, and
maintenance. Mainly hard-
ware information is pro-
vided.
An introduction to the entire NJ-series system is
provided along with the following information on
a Controller built with an NJ501 CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
Use this manual together with the NJ-series
CPU Unit Software User’s Manual (Cat. No.
W501).
NJ-series CPU Unit Soft-
ware User’s Manual
W501
NJ501-
□□□□
Learning how to program
and set up an NJ-series
CPU Unit. Mainly software
information is provided.
The following information is provided on a Con-
troller built with an NJ501 CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 lan-
guage specifications
Use this manual together with the NJ-series
CPU Unit Hardware User’s Manual (Cat. No.
W500).
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC-
SE2
□□□
Learning about the operat-
ing procedures and func-
tions of the Sysmac Studio.
Describes the operating procedures of the Sys-
mac Studio.
CJ-series PROFIBUS
Master Units Operation
Manual for NJ-series
CPU Unit (This docu-
ment)
W509 CJ1W-PRM21 Learning about the func-
tions and operating proce-
dures when the CJ-series
PROFIBUS Master Unit is
used in an NJ-series sys-
tem configuration.
The functions and operating procedures when
the CJ-series PROFIBUS Master Unit is used in
an NJ-series system configuration are described
as well as the operation of CX-ConfiguratorFDT.
CJ-series PROFIBUS
Slave Unit Operation
Manual for NJ-series
CPU Unit
W510 CJ1W-PRT21 Learning about the func-
tions and operating proce-
dures when the CJ-series
PROFIBUS Slave Unit is
used in an NJ-series sys-
tem configuration.
The functions and operating procedures when
the CJ-series PROFIBUS Slave Unit is used in
an NJ-series system configuration are described
as well as the operation of CX-ConfiguratorFDT.
SmartSlice GRT1-series
Communication Unit
Operation Manual
W04E GRT1-PRT Learning about the GRT1-
series SmartSlice PROFI-
NET Communication Unit.
Describes the GRT1-PRT PROFIBUS Commu-
nications Unit for OMRON’s SmartSlice I/O
Units. It also describes how to install and opera-
tion the Unit.
SmartSlice GRT1 Series
Slice I/O Units
W455 GRT1-series Digi-
tal I/O Units, Ana-
log I/O Units,
Counter and Posi-
tioning Units, Sys-
tem Units
Learning about the various
SmartSlice I/O Units that
work with the GRT1-PRT-
series Communication
Unit.
Describes the models, specifications, functions,
operating procedures, and applications of
GRT1-series Slice I/O Units.
CS/CJ Series PROFI-
BUS Master Unit Opera-
tion Manual
W409
CS1/CJ1W-PRM21 Learning about the
CS1/CJ1W-PRM21 PRO-
FIBUS Master Units.
Describes the operation and configuration
details of the CS1W-PRM21 and CJ1W PRM21
PROFIBUS DP and PROFIBUS DP-V1 Master
Units when used in CS/CJ series systems.

Omron CJ Series Specifications

General

Brand	Omron
Model	CJ Series
Category	Controller
Language	English