Omron CJ Series User Manual

6 Message Communications
6-6
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
Trigger
_Port_isAvailable
PRM21_MstrOperateSta
Determining the SendCmd instruction execution completion
Trigger reception
Se n d Cm d _ i n s t a n c e . D o n e
Operat ingEnd
SendCmd_instance.Error
1 InDNetAdr.NetNo:=0; // Network address settings
2 InDNetAdr.NodeNo:=0; //
3 InDNetAdr.UnitNo:=BYTE#16#11; //
4 InOption.isNonResp:=FALSE; //
Response monitoring and retry settings
5 InOption.TimeOut:=60; //
6 InOption.Retry:=0; //
7 Sdata[0]:=BYTE#16#28; // Command data settings
8 Sdata[1]:=BYTE#16#01; //
9 Sdata[2]:=BYTE#16#41; //
10 Sdata[3]:=BYTE#16#0E; //
11 Sdata[4]:=BYTE#16#00; //
12 Sdata[5]:=BYTE#16#9C; //
13 Sdata[6]:=BYTE#16#00; //
14 Sdata[7]:=BYTE#16#01; //
15 Sdata[8]:=BYTE#16#73; //
1
// Processing after normal end
2 ;
1 // Processing after an error completion
2 ;
Operat ing
Communications parameters settings
Processing at normal end
Processing at an error completion
Operat ing
SendCmd instruction execution
Operat ing
Operating SendCmd_instance.Done
Operat ing SendCmd_instance.Error
Se n d Cm d _ i n s t a n c e
Ex e c u t e
DstNetAdr
CommPort
Cm d D at
Cm d Si ze
Re s p D a t
Done
Bu st y
Error
ErrorID
ErrorIDEx
Re s p D a t
Opt ion
InDNet Adr
_ePORT#_NONE
Sdat a[0]
UINT#9
Rdat a[0]
InOption
Se n d Cm d
RS_instance
RS
Se t Q 1
Re s e t 1Operat ingEnd

Omron CJ Series Specifications

General

Brand	Omron
Model	CJ Series
Category	Controller
Language	English