Omron CJ2 Series User Manual

10. Appendix 2 Setting the Tag Data Links Using the Software
63
10.4.2. Setting the Tags and Tag Sets
Set the tags and tag sets of the send area and receive area of the PLC.
1
Right-click the node 2 device
and select Parameter - Edit.
2
The Edit Device Parameters
Dialog Box is displayed.
Click the Tab Sets Tab.
3
Click the In - Consume Tab.
Click the New Button.
4
A confirmation dialog box is
displayed. Click the Yes Button.

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC