Omron CJ2 Series User Manual

10. Appendix 2 Setting the Tag Data Links Using the Software
71
7
The data on the Tag Sets Tab is
displayed. Select the
In-Consume Tab and click the
Edit Tags.
Here, register an area (node 2
→ node 1) where node 1
receives data.
8
The Edit Tags Dialog Box is
displayed.
Select the In - Consume Tab.
The tab page shows the variable
name that was set in 10.3.2
Setting the Global Variables and
that is listed in 9.2. Relationship
between Destination Device and
Global Variables.

Omron CJ2 Series Specifications

General

CPU Units	CJ2H, CJ2M
Data Memory Capacity	32K words (CJ2M), 128K words (CJ2H)
EtherNet/IP	Yes (some models)
I/O Capacity	Up to 2, 560 I/O points
Communication Ports	Ethernet, RS-232C
Expansion Units	Up to 40 expansion units
Programming Languages	Ladder diagram, Structured text, Function block diagram
Instruction Execution Speed	0.04 μs (basic instructions)
Serial Ports	1 (RS-232C)
Expansion Slots	Up to 10 (CJ2H)
Operating Temperature	0 to 55°C
Storage Temperature	-25°C to 75°C
Power Supply Voltage	100 to 240 VAC, 24 VDC