174
GT1-CT01 Counter Unit Section 5-4
Output Specifications (External Output: OUT1, OUT2)
Components
Note Setting for the Counter Unit is carried out in a PC word (output area allocated
to the Counter Unit).
Item Specification
Rated output current 0.5 A/point
Residual voltage 1.2 V max. at 0.5 A DC (between each output termi-
nal and V and each output terminal and G)
Leakage current 0.1 mA max. at 24 VDC (between each output termi-
nal and V and each output terminal and G)
ON response time 0.5 ms max.
OFF response time 1.5 ms max.
Insulation resistance 20 MΩ min. at 250 VDC (between isolated circuits)
Isolation method Photocoupler
Number of circuits 2 points
U.ERR Indicator
Unit error: Lit red
Unit normal: Not lit
DIN Track Mounting Hook
I/O Unit Interface
Communications Connector 1
(on the Communications Unit side)
TS Indicator
Shows the communications status of the I/O Unit interface.
Normal communications: Lit green
I/O Unit interface error: Lit red
During initialization, or with no power supply: Not lit
I/O Unit Interface
Communications Connector 2
(on the terminator side)
Terminal Block
A, B Indicator
Lit when the encoder
input is ON.
IN Indicator
Lit when the external
input is ON.
OUT1, OUT2 Indicator
Lit when external out
put is ON.
(Refer to page 200.)
(Refer to page 201.)
To Next Page
Loading...
